View source | Discuss this page | Page history | Printable version   

Bill of Materials Production

This article is protected against manual editing because it is automatically generated from Openbravo meta-data. Learn more about writing and translating such documents.
Back button.png   Back to Warehouse Management


Contents

Introduction

Create and run production processes using the previously defined bills of materials.

Unlike the name suggests, this process is not part of production. This set up is used to combine different end products into another bundled product. For example for a computer that is shipped with different keyboards or products that are shipped with different power cables. There is no actual production involved for the creation of the new product.
The set up of this screen is combined with setups in the product screen:

BOM Production

Create production processes to run using the previously defined bills of materials.

In this section the organization is selected, a name of the bundling that will be executed, as well as a date on which it will occur.

Production Plan

Add bills of materials to be produced in a specified production plan.

In this section the product is selected and the number that is executed. Also, the storage bin in which the result of the Production will be stored must be selected.
As indicated in the introduction, the product that is selected needs to be set up correctly first:

I/O Products

Create and edit the products that are going to be used in the production

After the Production Plan tab is filled out, the Create/Process Production button is clicked to generate the information in this section. Based on the set up of the information in the bill of materials tab of the product combined with the production quantity in the production plan tab, the information of the components to be used and which quantity was generated.
After clicking the Create/Process Production button for the second time, the changes are executed. In the popup the checkbox 'Product quantity must be on stock' can be selected, so the process is only executed if the components are in stock. After successfully processing, the stock of the components decreases and the stock of the bundled product increases.

Bulbgraph.png   Currently, processes involved in the Bill Of Materials Production does not support negative stock. For this reason, if the checkbox 'Product quantity must be on stock' is not selected and there is not enough stock of the consumed products, the available quantity in stock will be used to fill the quantities in the [I/O Products] tab lines.
Bulbgraph.png   This feature is available starting from 3.0RR19Q2.

There is a check named Force Use Of Warehouse Of Selected Storage Bin When enabled, the same Warehouse of the selected Storage Bin will be used to retrieve the stock to be consumed. If it is not enabled, the process will take into account all available Warehouses for the set in the header of the Document.

Accounting

Accounting information related to bill of materials production

For more details please review the accounting article.



Full list of Bill of Materials Production window fields and their descriptions is available in the Bill of Materials Production Screen Reference.

Back button.png   Back to Warehouse Management

Retrieved from "http://wiki.openbravo.com/wiki/Bill_of_Materials_Production"

This page has been accessed 17,082 times. This page was last modified on 23 July 2014, at 10:57. Content is available under Creative Commons Attribution-ShareAlike 2.5 Spain License.