View source | Discuss this page | Page history | Printable version   

Periodic Quality Control

This article is protected against manual editing because it is automatically generated from Openbravo meta-data. Learn more about writing and translating such documents.
Back button.png   Back to Production Management


Introduction

Define checkpoints to be used for quality control of a produced product.

The periodic Quality Control is set up to ensure the quality of the end product of the production process. For example a check to see if the size is correct, the color is correct or if all specifications of the product are correct.

Test

Create checkpoints to be used for quality control of produced products.

Another example is to see if for a product the label is in the correct language and if it is put on correctly:

WS800159.png

Check Point

Add quality tests to be taken for a specified checkpoint.

WS800160.png



Full list of Periodic Quality Control window fields and their descriptions is available in the Periodic Quality Control Screen Reference.

Back button.png   Back to Production Management

Retrieved from "http://wiki.openbravo.com/wiki/Periodic_Quality_Control"

This page has been accessed 5,657 times. This page was last modified on 23 July 2014, at 10:58. Content is available under Creative Commons Attribution-ShareAlike 2.5 Spain License.