View source | Discuss this page | Page history | Printable version   

Quality Control Point

This article is protected against manual editing because it is automatically generated from Openbravo meta-data. Learn more about writing and translating such documents.
Back button.png   Back to Production Management


Contents

Introduction

Define quality control check points to be used for testing the product quality at any point in the production process.

Quality Control Point is a point or stage of manufacturing where it is essential to control (reduce or eliminate) a risk to avoid downtime.

For example, checking the temperature of oil every three hours. There is the ability to set the frequency and list required tasks and accountable personnel.

Check Point Set

Create check point sets and define tests frequencies.

WS800151.png

Check Point

Create check points for a related set.

WS800152.png

Shift

Define shifts when the tests for a related group will be performed.

The information in this tab is used for the automatic population of check point set information when the results are reported in the Quality Control Report. In the main section of the report the shift is selected.

The starting date in this set up is used for the automatic population of the time information of the Quality Control Report.

WS800171.png



Full list of Quality Control Point window fields and their descriptions is available in the Quality Control Point Screen Reference.

Back button.png   Back to Production Management

Retrieved from "http://wiki.openbravo.com/wiki/Quality_Control_Point"

This page has been accessed 27,272 times. This page was last modified on 23 July 2014, at 10:58. Content is available under Creative Commons Attribution-ShareAlike 2.5 Spain License.