User Manual 2.40/Production Management

Contents 1 Transactions 1.1 Process Plan 1.1.1 Employee 1.1.2 Indirect Cost 1.1.3 I/O Products 1.1.4 Machine 1.1.5 Operation 1.1.6 Process Plan 1.1.7 Version 1.2 Work Requirement 1.2.1 Header 1.2.2 Operation 1.2.3 Product 1.3 Work Effort 1.3.1 Employee 1.3.2 Global Use 1.3.3 Incidence 1.3.4 Indirect Cost 1.3.5 Machine 1.3.6 Outsourced 1.3.7 Product 1.3.8 Production Run 1.3.9 Salary Category 1.3.10 Toolset 1.3.11 Work Effort 1.4 Quality Control Report 1.4.1 Check Point Set 1.4.2 Date and Shift 1.4.3 Time 1.4.4 Values 1.5 Periodic Quality Control Data Collection 1.5.1 Result 1.5.2 Test 1.6 Internal Consumption 1.6.1 Header 1.6.2 Lines 1.7 Maintenance Order 1.7.1 Header 1.7.2 Task 1.7.3 Worker 1.8 Schedule Maintenance 1.9 Maintenance Plan 1.9.1 Maintenance 1.10 Calculate Planned Raw Material Costs 1.11 Calculate Production Costs 2 Analysis Tools 2.1 Pending Production 2.2 Daily Work Requirement Order Packing 2.3 Daily Work Requirements Report 2.4 Standard Costs Report 2.5 Production Run Status Report 2.6 Pending Work Requirement 2.7 Production Cost 3 Setup 3.1 Section 3.2 Work Center 3.2.1 Machine Station 3.2.2 Process 3.2.3 Toolset Process 3.2.4 Work Center 3.3 Activity 3.3.1 Activity 3.3.2 Toolset Process 3.4 Toolset 3.4.1 Toolset 3.4.2 Toolset Type 3.5 Machine Category 3.5.1 Category 3.5.2 Maintenance 3.5.3 Periodicity 3.6 Machine 3.6.1 Cost 3.6.2 Machine 3.6.3 Maintenance 3.6.4 Periodicity 3.7 Cost Center 3.7.1 Cost Center 3.7.2 Employee 3.7.3 Indirect Cost 3.7.4 Machine 3.7.5 Version 3.8 Periodic Quality Control 3.8.1 Check Point 3.8.2 Test 3.9 Quality Control Point 3.9.1 Check Point 3.9.2 Check Point Set 3.9.3 Shift 3.10 Work Incidence 3.11 Maintenance Task 3.12 Indirect Cost 3.12.1 Indirect Cost 3.12.2 Value

Transactions

Process Plan

Define the steps and processes to be completed for an intermediate or finished good, taking in account available resources. What is a Process Plan? A sequence of events which map and organize the manufacturing of one or many products. The same product can be produced using a variety of production plans, however normally each product has one process plan.

View larger

Employee

Define the employees that can perform a specified process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Estimated Cost:	A theoretically calculated cost associated with this specific tab.
Organization:	Organizational entity within client.
Salary Category:	A classification of salaries based on similar characteristics or attributes.
Sequence:	The order of records in a specified document.

Indirect Cost

Define indirect costs related to a specified process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Estimated Cost:	A theoretically calculated cost associated with this specific tab.
Indirect Cost:	Any charge of doing business which cannot be directly allocated to production.
Organization:	Organizational entity within client.
Sequence:	The order of records in a specified document.

I/O Products

Define input and output products taking part in a specified process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Component Cost:
Cost:	A charge related to conducting business.
Decrease:
Organization:	Organizational entity within client.
Product:	An item produced by a process.
Production Type:	A classification stating whether something has been created or used in the sequence.
Quantity:	The number of a certain item.
Rejected:
Sequence:	The order of records in a specified document.
UOM:	A non monetary unit of measure.

Machine

Define machines that are used for a specific process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Estimated Cost:	A theoretically calculated cost associated with this specific tab.
Machine:	A tool use to aid in or fully complete a task.
Organization:	Organizational entity within client.
Sequence:	The order of records in a specified document.

Operation

Add processes to be performed for a specified process plan.

Keep in Mind:

• The user can introduce all the input and output products included in the chosen sequence. The products can be raw materials, work-in-progress, or finished goods. Additionally, it is necessary to introduce the quantity of each input and output product.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Calculated:
Client:	Client for this installation.
Cost Center Use Time:	The amount of time a process takes to complete.
Description:	A space to write additional related information.
Global Use:
Multiplier:
Name:	A identifier for a document which can be used as a search tool.
No Qty:
Organization:	Organizational entity within client
Outsourced:	A decision to have a task or phase completed by an external business partner.
Outsourcing cost:
Preparation time:
Process:	A series of actions carried out in sequential order.
Process Plan Version:
Search Key:	A fast method for finding a particular record.
Sequence:	The order of records in a specified document.
Sequence:	The order of records in a specified document.

Process Plan

Create production process models.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Conversion Rate:	The amount or quantity at which one unit of measure is changed to another.
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Process Plan:	A guide stating how a certain item must move through the transformation process.
Process Unit:	The number of process units obtained by executing a process plan one time.
Search Key:	A fast method for finding a particular record.

Process Buttons:

Explode Phases:
Copy Version:	Process to copy the structure of the selected version.

Version

Create process plans valid for a specified time period.

What is a Process Plan Version?

Versions are process plans created for a specific period of time. When a work requirement is created, data from a currently active process plan version is used.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Document No.:	An often automatically generated identifier for all documents.
Ending Date:	A parameter stating the ending time range related for a specified request, query, etc.
Organization:	Organizational entity within client
Process Plan:	A guide stating how a certain item must move through the transformation process.
Process Plan Version:
Starting Date:	A parameter stating the starting time range related to a specified request.

Work Requirement

Create an order to execute the selected process plan. What is a Work Requirement? Defined documents that execute a selected fabrication of a product based on the map a previously defined process plan. Every work requirement that is launched is to done so in order to produce a certain product quantity. However it is possible that the result could be multiple products.

View larger

Header

Create production orders by choosing dates and the previously defined work requirement model.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Closed:
Conversion Rate:	The amount or quantity at which one unit of measure is changed to another.
Document No.:	An often automatically generated identifier for all documents.
Ending Date:	A parameter stating when a specified request will end.
Explode Phases:
Launch Date:
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Process Plan:	A guide stating how a certain item must move through the transformation process.
Process Unit:	The number of process units obtained by executing a process plan one time.
Processed:	The document has been processed
Quantity:
Secondary Qty:	Secondary Quantity
Start Date:	A parameter stating when a specified request will begin.
Work Requirement:	An order authorizing the production of a specific product and product quantity.
Work Requiremente Process:
WR Type:

Operation

Add or edit operations and activities to be performed for the related work requirement.

Keep in Mind:

• Although, the work requirement operations are generated based on a chosen process plan, it is possible to modify any parameter of a desired operation and included products. In each operation the user can see the quantity to be produced, quantity completed. Additionally using the “Close Phase” button it is to close the work requirement phase. If all the phases are closed the work requirement will also be closed.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Close Phase:	With this process it will be closed the work requirement phase. If all the phases are closed the work requirement will also be closed.
Cost Center Use Time:	The amount of time a process takes to complete.
Description:	A space to write additional related information.
Global Use:
Name:	A identifier for a document which can be used as a search tool.
No Qty:
Organization:	Organizational entity within client
Outsourced:	A decision to have a task or phase completed by an external business partner.
Preparation time:
Process:	A series of actions carried out in sequential order.
Quantity:
Quantity Completed:
Sequence:	The order of records in a specified document.
Sequence:	The order of records in a specified document.
Work Requirement:	An order authorizing the production of a specific product and product quantity.
WR Phase:

Product

Add or edit I/O products to be used for the selected operation of the work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Decrease Indicator:
MA_Wrphaseproduct_ID:
Movement Quantity:	The number of items being moved from one location to another.
Order Quantity:	The number of a certain item involved in the transaction, shown in units which differ from the standard UOM.
Order UOM:	The unit of measure being used for the request.
Organization:	Organizational entity within client
Product:	An item produced by a process.
Production Type:	A classification stating whether something has been created or used in the sequence.
UOM:	A non monetary unit of measure.
WR Phase:

Work Effort

Edit precisely what has been produced from a selected product order. What is a Work Effort? Documents filled in by employees as they complete specific aspects of the work requirements phases. These documents reflect what has already been done in order to calculate the real cost of production comparing it to the originally planned cost.

View larger

Employee

Add employees that took part in the completion of a related work requirement.

Keep in Mind:

• The employees that appear in this tab must be previously defined as business partners, and marked as employees and workers.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Business Partner :	Anyone who takes part in daily business operations by acting as a customer, employee, etc.
Client:	Client for this installation.
Organization:	Organizational entity within client
Production:	An indication that an item is being used in production.

Global Use

Add global use of products used for completion of a related work requirement.

Keep in Mind:

• A product to be introduced in this tab, must be marked as a global use in the production run tab in the work requirement window. Once a production run is processed, the global use products will be proportionally divided through all production runs.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Attribute Set Value:	An attribute associated with a product as part of an attribute set.
Client:	Client for this installation.
Movement Quantity:	The number of items being moved from one location to another.
Order Quantity:	The number of a certain item involved in the transaction, shown in units which differ from the standard UOM.
Order UOM:	The unit of measure being used for the request.
Organization:	Organizational entity within client
Product:	An item produced by a process.
Production:	An indication that an item is being used in production.
Storage Bin:	A set of coordinates (x, y, z) which help locate an item in a warehouse.
UOM:	A non monetary unit of measure.

Incidence

Add work incidences that might have occurred during the completion of a related work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Endtime:
Incidence:	Incidence
Organization:	Organizational entity within client
Production:	An indication that an item is being used in production.
Starttime:

Indirect Cost

Add and edit indirect costs related to a specified completed part of a work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Indirect Cost:	Any charge of doing business which cannot be directly allocated to production.
Organization:	Organizational entity within client
Production Plan:	The proposal for a how production will be carried out.

Machine

Add and edit resources used to complete a specified part of a work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Machine:	A tool use to aid in or fully complete a task.
Organization:	Organizational entity within client
Production Plan:	The proposal for a how production will be carried out.
Use:

Outsourced

Add invoices corresponding to the outsourced part of a completed work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost:	A charge related to conducting business.
Invoice Line:	A statement displaying one item or charge in an invoice.
Organization:	Organizational entity within client
Production Plan:	The proposal for a how production will be carried out.

Product

Add and edit I/O products related to a completed part of a work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Attribute Set Value:	An attribute associated with a product as part of an attribute set.
Calculated:
Client:	Client for this installation.
Description:	A space to write additional related information.
Line No.:	A line stating the position of this request in the document.
Order Quantity:	The number of a certain item involved in the transaction, shown in units which differ from the standard UOM.
Order UOM:	The unit of measure being used for the request.
Organization:	Organizational entity within client
Print Labels:
Product:	An item produced by a process.
Production Line:	A statement displaying one item or action in the application.
Production Plan:	The proposal for a how production will be carried out.
Production Type:	A classification stating whether something has been created or used in the sequence.
Quantity:
Rejected Qty:	Rejected Quantity
Secquality:
Storage Bin:	A set of coordinates (x, y, z) which help locate an item in a warehouse.
UOM:	A non monetary unit of measure.

Production Run

Add progress details of the specified work requirements.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
CC Use:	Cost Center Use
Client:	Client for this installation.
Conversion Rate:	The amount or quantity at which one unit of measure is changed to another.
Cost Center Version:	The cost center being used during a specified time period.
Create Standards:	Process to insert the products of the Production Run. If the phase is of GroupUse used productos will go to "Global Use" tab. Else if is of noqty all the quantities will be zero.
Description:	A space to write additional related information.
Donequantity:
Line No.:	A line stating the position of this request in the document.
Needed Quantity:
Organization:	Organizational entity within client
Outsourced:	A decision to have a task or phase completed by an external business partner.
Process Unit:	The number of process units obtained by executing a process plan one time.
Processed:	A confirmation that the associated documents or requests are processed.
Product:	An item produced by a process.
Production:	An indication that an item is being used in production.
Production Plan:	The proposal for a how production will be carried out.
Real Cost:	Real Cost
Rejected Qty:	Rejected Quantity
Secondary Qty:	Secondary Quantity
Storage Bin:	A set of coordinates (x, y, z) which help locate an item in a warehouse.
WR Phase:

Salary Category

Add or edit salary category workers that took part in a work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost UOM:	The unit of measure associated with the cost located adjacent to this field.
MA_Pl_Employee_ID:
Organization:	Organizational entity within client
Production Plan:	The proposal for a how production will be carried out.
Quantity:	The number of a certain item.
Salary Category:	A classification of salaries based on similar characteristics or attributes.

Toolset

Add or edit toolsets used to complete a specified part of a work requirement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Organization:	Organizational entity within client
Production Plan:	The proposal for a how production will be carried out.
Toolset:	Toolset
Used:
Used toolset:

Work Effort

Create a report for the completed work requirement for a desired date and time.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Document No.:	An often automatically generated identifier for all documents.
End Time:
Movement Date:	The date that a certain item is moved from one location to another.
Organization:	Organizational entity within client
Processed:	A confirmation that the associated documents or requests are processed.
Production:	An indication that an item is being used in production.
Sales Transaction:	An indication that a transfer of goods and money between business partners is occurring.
Start Time:
Validate Work Effort:	Process to validate and actualize stocks of all production runs.

Quality Control Report

Create and edit measurements and report findings at predefined checkpoints. The goal is to ensure output quality during production.

View larger

Check Point Set

Create and edit checkpoints for the related measurement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Measure Group:
Measure Shift:
Organization:	Organizational entity within client
Product:	An item produced by a process.
Quality Control Point Set:	A collection of points to be checked at a specified time period.
Secondary product:
Sequence:	The order of records in a specified document.

Date and Shift

Create measurements and insert gathered values or a specifc date and shift.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Comments:	A space to write additional related information.
Create CCP:	Create the CCP for the date and shift selected
Edit CCP Measured Values:
Lot:	A group of identical or similar items organized and placed into inventory under one number.
Measure Shift:
Measurement Date:
Organization:	Organizational entity within client
Product:	An item produced by a process.
Sellbydate:
Shift:	A partition of the workday into intervals.
User/Contact:	An acquaintance to reach for information related to the business partner.

Time

Create and edit times for related check points.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Input Time Measurement:	With this process are inserted all the Control Points of the selected group to fill with taken measurements.
Measure Group:
Measure hour:
Measure Time:
Organization:	Organizational entity within client
Processed:	A confirmation that the associated documents or requests are processed.

Values

Create and edit values for a related measurement.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Check:
Client:	Client for this installation.
Critical Control Point:
Measure Time:
Measure Values:
Organization:	Organizational entity within client
Sequence:	The order of records in a specified document.
Text:	A place to add observations related to a specified check point.
Value:	A statement of worth or importance given in many forms.
Value type:

Periodic Quality Control Data Collection

Create and edit data collection and measurements related to quality control. This is done at predefined checkpoints for a produced product.

View larger

Result

Create and edit quality tests for a specified checkpoint, and add test results of the performed tests.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Organization:	Organizational entity within client
Periodic Control Case:
Periodic Control Test:
Periodic Control Value:
Test Date:
Test Result:

Test

Create measurements at a predefined checkpoint for produced product.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Attribute Set Value:	An attribute associated with a product as part of an attribute set.
Client:	Client for this installation.
Ending Date:	A parameter stating when a specified request will end.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Periodic Control:
Periodic Control Case:
Product:	An item produced by a process.
Run Periodic Control:	With this process are planed all the gatherings of the periodic control selected.
Start Date:	A parameter stating when a specified request will begin.

Internal Consumption

Define products which are only to be used inside the enterprise.

View larger

Header

Create products which are to be used inside the organization, and not sold to customers.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Internal Consumption:	An indication that an item will not be sold, but rather used internally.
Movement Date:	The date that a certain item is moved from one location to another.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Posted:	An accounting status noting if a specified transaction was added to the general ledger.
Process Internal Consumption:
Processed:	A confirmation that the associated documents or requests are processed.

Lines

Add internal consumption lines. Each line corresponds to one product.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Attribute Set Value:	An attribute associated with a product as part of an attribute set.
Client:	Client for this installation.
Description:	A space to write additional related information.
Internal Consumption:	An indication that an item will not be sold, but rather used internally.
Line No.:	A line stating the position of this request in the document.
Movement Quantity:	The number of items being moved from one location to another.
Order Quantity:	The number of a certain item involved in the transaction, shown in units which differ from the standard UOM.
Order UOM:	The unit of measure being used for the request.
Organization:	Organizational entity within client
Product:	An item produced by a process.
Storage Bin:	A set of coordinates (x, y, z) which help locate an item in a warehouse.
UOM:	A non monetary unit of measure.

Maintenance Order

Create and edit the results of a scheduled maintenance order.

View larger

Header

Add previously scheduled maintenances for a specific date and report observations.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Document No.:	An often automatically generated identifier for all documents.
Insert Maintenances:	Process which will insert scheduled maintenances on the part.
Maintenance Order:	A distinct characteristic of a machine used for processes and sometimes grouped within a category.
Organization:	Organizational entity within client
Part Date:
Shift:	A partition of the workday into intervals.

Task

Edit maintenance tasks of a specified order.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Comments:	A space to write additional related information.
Confirmation:	An indication that an action is accepted and will be completed as planned.
Description:	A space to write additional related information.
Internal Consumption:	An indication that an item will not be sold, but rather used internally.
Machine:	A tool use to aid in or fully complete a task.
Machine Type:	A distinct machine characteristic used for processes.
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Order:	A distinct characteristic of a machine used for processes and sometimes grouped within a category.
Maintenance Scheduled:
Maintenance Task:	A description to help explain a specified maintenance task.
Maintenance Type:	A set of maintenances which can be performed on a machine.
Organization:	Organizational entity within client
Result:	Result of the action taken
Scheduled Date:
Shift:	A partition of the workday into intervals.
Used Time:

Worker

Add or edit workers that took part in a specified maintenance part.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Business Partner :	Anyone who takes part in daily business operations by acting as a customer, employee, etc.
Client:	Client for this installation.
Maintenance Order:	A distinct characteristic of a machine used for processes and sometimes grouped within a category.
Maintenance Worker:
Organization:	Organizational entity within client

Schedule Maintenance

Create and edit a schedule for all scheduled maintenances which have been confirmed to be completed.

View larger

Maintenance Plan

Add and edit predefined maintenance plans.

View larger

Maintenance

Create and edit maintenance tasks for a specific date.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Comments:	A space to write additional related information.
Confirmation:	An indication that an action is accepted and will be completed as planned.
Description:	A space to write additional related information.
Internal Consumption:	An indication that an item will not be sold, but rather used internally.
Machine:	A tool use to aid in or fully complete a task.
Machine Type:	A distinct machine characteristic used for processes.
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Order:	A distinct characteristic of a machine used for processes and sometimes grouped within a category.
Maintenance Scheduled:
Maintenance Task:	A description to help explain a specified maintenance task.
Maintenance Type:	A set of maintenances which can be performed on a machine.
Organization:	Organizational entity within client
Result:	Result of the action taken
Scheduled Date:
Shift:	A partition of the workday into intervals.
Used Time:

Calculate Planned Raw Material Costs

Edit the potential costs of raw materials for a selected process plan.

View larger

Calculate Production Costs

Edit real production costs of all outputs to view results in the product window and the production cost report.

View larger

Analysis Tools

Pending Production

Create a report showing all products that are pending production and need to be sold.

Daily Work Requirement Order Packing

Create a report showing the raw materials requirements for production.

Daily Work Requirements Report

Create a report showing the raw materials requirements for production.

Standard Costs Report

Create a report showing standard product costs.

Production Run Status Report

Create a report showing the production orders status.

Pending Work Requirement

Create a report showing all the phases that are pending production for a selected work requirement.

Production Cost

Create a report showing production costs for a selected product.

Setup

Section

Create a production plant section to assign work centers to it.

View larger

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Section:	Section

Work Center

Create and add machines to be used in a work center.

View larger

Machine Station

Add machines to be used in a selected work center.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Machine:	A tool use to aid in or fully complete a task.
Machine Station:	Machine Station
Organization:	Organizational entity within client
Work Center:	A defined production area made up of resources such as machines and human labor.

Process

View the process related to a selected work center.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Process:	A series of actions carried out in sequential order.
Search Key:	A fast method for finding a particular record.
Work Center:	A defined production area made up of resources such as machines and human labor.

Toolset Process

View the toolsets of a selected process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Organization:	Organizational entity within client
Process:	A series of actions carried out in sequential order.
Toolset Process:	Toolset Process
Toolset Type:	A distinct toolset item characteristic used for processes.
Use Coefficient:

Work Center

Create work centers.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Search Key:	A fast method for finding a particular record.
Section:	Section
Work Center:	A defined production area made up of resources such as machines and human labor.

Activity

Create activities to be used in the production process.

View larger

Activity

Create activities to be used in the production process and their characteristics.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost Center:
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Process:	A series of actions carried out in sequential order.
Search Key:	A fast method for finding a particular record.
Work Center:	A defined production area made up of resources such as machines and human labor.

Toolset Process

Add toolsets to be used for completion of a specified process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Organization:	Organizational entity within client
Process:	A series of actions carried out in sequential order.
Toolset Type:	A distinct toolset item characteristic used for processes.
Use Coefficient:

Toolset

Define tools and groups of tools to be used in the production process.

View larger

Toolset

Define tools to be used in the production process.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Discarded:
Number uses:
Organization:	Organizational entity within client
Search Key:	A fast method for finding a particular record.
Storage Bin:	A set of coordinates (x, y, z) which help locate an item in a warehouse.
Toolset:	Toolset
Toolset Type:	A distinct toolset item characteristic used for processes.

Toolset Type

Create toolset types to group toolsets with similar characteristics.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Toolset Type:	A distinct toolset item characteristic used for processes.
Usecycle:

Machine Category

Create machine categories based on your desired characteristics.

View larger

Category

Define machine category to group machines with similar characteristics.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Machine Type:	A distinct machine characteristic used for processes.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client

Maintenance

Define maintenance types needed for a specified machine category.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Explode in machines:
Machine:	A tool use to aid in or fully complete a task.
Machine Type:	A distinct machine characteristic used for processes.
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Task:	A description to help explain a specified maintenance task.
Maintenance Type:	A set of maintenances which can be performed on a machine.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Planned Time:

Periodicity

Add interval timings to schedule and complete a specified maintenance.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Exclude weekend:
Initial date:
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Periodicity:
Month day:
Organization:	Organizational entity within client
Periodicity Type:
Shift:	A partition of the workday into intervals.
Weekday:	Any day of the week excluding Saturday and Sunday.

Machine

Create machines to be used in production.

View larger

Cost

Set the full cost of a related machine.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Amortization:	The depreciation or reduction of a product value over time.
Client:	Client for this installation.
Consume:
Cost:	A charge related to conducting business.
Cost UOM:	The unit of measure associated with the cost located adjacent to this field.
Cost UOM year:
Day hours:
Days year:
Improductive hours year:
Machine:	A tool use to aid in or fully complete a task.
Organization:	Organizational entity within client
Purchase Amount:
Toolset amount:
Valid from Date:	A parameter stating the starting time of a specified request.
Year value:

Machine

Add machines to be used in production processes.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost Center:
Machine:	A tool use to aid in or fully complete a task.
Machine Type:	A distinct machine characteristic used for processes.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Purchase year:
Search Key:	A fast method for finding a particular record.
Use cycle:

Maintenance

Define maintenance types needed for a specific machine.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Explode in machines:
Machine:	A tool use to aid in or fully complete a task.
Machine Type:	A distinct machine characteristic used for processes.
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Task:	A description to help explain a specified maintenance task.
Maintenance Type:	A set of maintenances which can be performed on a machine.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Planned Time:

Periodicity

Add timing intervals to schedule and complete a specified maintenance.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Exclude weekend:
Initial date:
Maintenance:	The act of ensuring the proper working order for a specified item.
Maintenance Periodicity:
Month day:
Organization:	Organizational entity within client
Periodicity Type:
Shift:	A partition of the workday into intervals.
Weekday:	Any day of the week excluding Saturday and Sunday.

Cost Center

Create and edit cost centers related to production to sum up charges associated with a specific transaction.

View larger

Cost Center

Create cost centers to be used in production processes.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
By default:
Calculated:
Client:	Client for this installation.
Cost:	A charge related to conducting business.
Cost Center:
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Search Key:	A fast method for finding a particular record.

Employee

Add employees to a specific cost center version.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost Center Employee:
Cost Center Version:	The cost center being used during a specified time period.
Cost UOM:	The unit of measure associated with the cost located adjacent to this field.
Organization:	Organizational entity within client
Quantity:	The number of a certain item.
Salary Category:	A classification of salaries based on similar characteristics or attributes.

Indirect Cost

Add indirect costs to specific cost center version.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost Center Version:	The cost center being used during a specified time period.
Indirect Cost:	Any charge of doing business which cannot be directly allocated to production.
Organization:	Organizational entity within client

Machine

Add resources to a specific cost center version.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost Center Machine:
Cost Center Version:	The cost center being used during a specified time period.
Machine:	A tool use to aid in or fully complete a task.
Organization:	Organizational entity within client
Use:

Version

Create cost center versions to be used with specified time periods.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Cost:	A charge related to conducting business.
Cost Center:
Cost Center Version:	The cost center being used during a specified time period.
Cost UOM:	The unit of measure associated with the cost located adjacent to this field.
Document No.:	An often automatically generated identifier for all documents.
Organization:	Organizational entity within client
Valid from Date:	A parameter stating the starting time of a specified request.

Periodic Quality Control

Define checkpoints to be used for quality control of a produced product.

View larger

Check Point

Add quality tests to be taken for a specified checkpoint.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Days:
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Periodic Control:
Periodic Control Test:

Test

Create checkpoints to be used for quality control of produced products.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Organization:	Organizational entity within client
Periodic Control:

Quality Control Point

Define quality control check points to be used for testing the product quality at any point in the production process.

View larger

Check Point

Create check points for a related set.

Fields:

Active:	A flag indicating whether this record is available for use or de-activated.
Client:	Client for this installation.
Critical:
Critical Control Point:
Description:	A space to write additional related information.
Name:	A identifier for a document which can be used as a search tool.
Number of measures:
Organization:	Organizational entity within client
Quality Control Point Set:	A collection of points to be checked at a specified time period.
Sequence:	The order of records in a specified document.
Value type:

Check Point Set